Mesin Pemotong Rumput Gendong

Jual Mesin Pemotong Rumput Gendong Fitur Produk - M4 Mini 4-Stroke OHC engine - Working through a full 360° with 2 blade cutter - fine trigger throttle to adjust speed boost can be acquired trough the sub throttle lever - Wide tipe throttle lever and side type engine swicth to stop the engine in one motion - A robust 28mm diameter pipe frame housed up to 7 bushes, yeilds low vibration and prolong usage life - rugged gear case, designed to withstand tough working condition Spesifikasi Cutter Type 2-blade cutter Blade Diameter 305 mm Cutter rpm 5250 rpm ( at 7000 engine rpm) Dimensions Length * 1 1928 mm Width 637 mm Height 444 mm Throttle type SingleTrigger throttle Dry weight * 2 8.45 kg Engine Model GX35T Type 4-stroke, overhead cam, single cylinder Displacement 35.8 cm3 Bore x stroke 39.0 x 30.0 mm Compression ratio 8.0 : 1 Net Power ( SAE J1349) * 1.0kW ( 1.3 HP) / 7000 min-1 rpm Fuel consumption ( @ net power) 0.71 l/ h at 7000 rpm Max. Net Torque ( SAE J1349) * 1.6 N.m ( 0.16 kgf.m, 1.2 lbf.ft) / 5500 min-1 rpm Fuel tank capacity 0.63 l Fuel used Unleaded gasoline ( Oktan 86 or higher) Oil capacity 0.1 l Ignition system Transistorized magneto ignition Starting system Recoil starter Air cleaner Semi dry type * 1: With cutter mounted. * 2: Without cutter. * The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 7, 000 rpm ( Engine Net Power) and at 5, 500 rpm ( Engine Max. Net Torque) . Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Contact us : 0852 1814 1054 021 9664 1320 E-mail : lab.naga@ yahoo.com Jupentus Sinaga